 |
|
|
|
16km QPSK Wireless MAVLINK Video Transmitter 0ms Latency With RJ45 RS232 Port
Product Details:
Payment & Shipping Terms:
|
Detailed Product Description
| Air To Ground Distance: | 14-16km | Environmen: | LOS And NLOS |
|---|---|---|---|
| Frequency: | 800Mhz/1.4GHZ | Antenna: | Mimo |
| Weight: | 65g | Encryption: | AES128 |
| Modulation: | QPSK | RF Power: | 0.6watts |
16km QPSK Wireless MAVLINK Video Transmitter 0ms Latency With RJ45 RS232 Port
FNM-8416 this exclusive design mini HD wireless video transmitter is using the 4th generation mobile communication core COFDM multi-carrier modulation technology. It supports 1.4GHz(1428-1448MHz) and 800Mhz?(806-826Mhz) suitable for long distance, high code stream, NLOS and wireless aerial transmission application. With RS232 bidirecitonal port, can transmit video audio and control signal in a long distance up to 16km.
Its advantages small size, lightweight and high bandwidth that can transmit high quality full 1080P HD video and audio even though high-speed mobile shooting. It’s widely used in UAV aviation filming.
Main Features:
- Operates at 800Mhz/1.4GHz frequency, no license needed, and only suitable for LOS(Line-of-Sight) and NLOS(Non Line of Sight) use
- Transmission power 600mW(Bi-Amp, 0.6watt Peak Power of each power amplifier)
- Long operating range over 16km
- Air speed up to 6Mbps
- Link establishing/recover time 12-25ms
- Compact size of 57 x 55.5 x 15.7 mm
- Light weight less than 65g
- Point-to-Point and Point-to-Multipoint supported
- Optimized transmission for 1080P high definition video
- Support two remote controllers to control UAV and on board devices through the PPM port of Local Side Unit. And the On Board Unit outputs the control signals through one SBus port and two PPM ports synchronously
- Two transparent serial data link, the end to end delay less than 10ms
- Transparent TCP/IP transmission channel, provides most flexibility for IP based devices to apply on UAV platforms
- This model has advantages of light weight, mini size, low power consumption, high stability and receiving sensitivity. With RJ45 and TTL bidirectional serial port, this model can wireless transmit video and Ethernet Data.
Specification
| Specifications | ||
| Frequency | 800Mhz | 806~826 MHz |
| 1.4Ghz | 1428~1448 MHz | |
| Bandwidth | 8MHz | |
| RF Power |
0.6watt (Bi-Amp, 0.6watt Peak Power of each power amplifier) |
|
| Transmit Range |
800Mhz: 16km 1400Mhz: 14km |
|
| Transmit Rate |
6Mbps (Video Stream, Ethernet Signal and serial data share) The best video stream: 2.5Mbps |
|
| Baud Rate | 115200bps(Adjustable) | |
| Rx Sensitivity | -104/-99dbm | |
| Fault Tolerance Algorithm | Wireless base band FEC forward error correction | |
| Video Latency | The video not be compressed. No latency | |
| Link Rebuild Time | <1s | |
| Modulation | Uplink QNSK/Downlink QNSK | |
| Encryption | AES128 | |
| Start Time | 15s | |
| Power | DC-12V (7～18V) | |
| Interface |
Interfaces on Tx and Rx are same Video input/Output: Ethernet×3 Power Input Interface×1 Antenna Interface: SMA×2 Serial×1: (Voltage:±13V(RS232), 0~3.3V(TTL) |
|
| Indicators |
Power Ethernet Status Indicator Wireless Connection Setup Indicator x 3 |
|
| Power Consumption |
Tx: 5W Rx: 3.5W |
|
| Temperature |
Working: -40 ~+ 85℃ Storage: -55 ~+85℃ |
|
| Dimension | Tx/Rx: 57 x 55.5 x 15.7 mm | |
| Weight | Tx/Rx: 65g | |
| Design | CNC Technology | |
| Double Aluminum Alloy Shell | ||
| Conductive anodizing craft | ||
cofdm hd wireless transmitter, wireless hd video transmitter
Contact Details
Other Products
-
IP Camera 10-14km UAV Transmitter Live Video streaming and data transmitting System
-
Drone IP Video Transmitter 2.4G, TDD-COFDM Mini Video Link 30dBm Long Distance
-
No encoding UAV Video sender , 2.4 Ghz Video Transmitter And Receiver
-
1.4GHz UHF 16km TDD - COFDM wireless transmitter video duplex data for IP camera
-
Bi-directional COFDM wireless video data link for lift drone 50km ultra long range
-
Miracast octocopter video data hdmi wireless transmitter TDD - COFDM 2W